Spyderco Manix 2 Black Lightweight PlainEdge Knife (C101PBK2)
- Manix2 Lightweight Plain, Generation 2 with one of the strongest Ball Bearing-Lock locking mechanisms. Blade made of high quality CTS BD1 steel, lightweight FRCP cladding, weight reduction by 42% compared to knife with G-10 covers...
Manix 2 Black Lightweight Plain - one of the best EDC folders - awarded for the most innovative American design by the Winner of Blade magazine. Blade of excellent CTS BD1 steel - ultra-light FRCP cladding, reducing 42% of the folder's weight compared to the G-10 covers - one of the strongest Ball Bearing-Lock locking mechanisms. Produced at the Spyderco factory in the USA (Golden, Colorado).
CTS BD1 - corrosion-resistant, well-focused American phenomenal stainless steel. Manufactured in the USA by Carpenter Technology Corporation.
Ball Bearing-Lock - one of the strongest locking mechanisms on the blade. Hardened ball bearing placed in a black polymer basket in the open position pressed against the blade by means of a spring. Made in USA.
Blade - Leaf-Shaped profile, thickness 3.2 mm. The Satin Finish (semi-matte) coating eliminates glares. Smooth blade (Plain type) was made with a full flat cut (Full Flat Grind). The flat cut provides excellent cutting edge geometry with a sharp point. An enlarged 14 mm round SpyderHole cut-out (Spyderco patent) allows you to open the knife also in the glove. Clear Finger Choil - an arched cut under the index finger and a notched thumb ramp on the back of the blade increase control over the knife.
Handle - in black color. Made of light translucent FRCP (Fiberglass Reinforced Co-Polymer), it has bi-directional anti-slip texture (Bi-Directional Texturing) providing an excellent grip in all conditions (also with greasy, wet hands). The folder is equipped with a screwed wire clip (left / right-handed) that allows you to carry the knife in the tip-up position (tip up). Notching cuts on the spine of the Spine Jimping handle increases the grip. In the rear part of the handle, was placed an enlarged gap (lanyard hole) for the cable.
Technical specification:
Product number: C101PBK2
Name: Manix 2 Lightweight Black PlainEdge
Steel type: CTS BD1
The length of the blade: 86 mm / 3.37 "
Thickness of the blade: 3.2 mm / 0.125 "
Overall length: 204 mm / 8.03 "
Composite length: 118 mm / 4.66 "
Weight: 85 g / 3 oz
Cutting edge type: Plain (smooth)
Cut type: Full Flat
Lock type: Ball Bearing Lock
Handle type: FRCP
Clip: Left / Right, Tip-Up
Country of origin: USA
Producer: Spyderco, U.S.A.
Przeczytaj!
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.