FOX Core Folding Knife design by Jesper Voxnaes / Black Blade (FX-604 OD)
- FX-604 OD (Green), the compact core folder of the Italian FOX. One of the best knives for everyday use with two ways of opening the blade with one hand using an oval hole or flipper. Design by Jesper Voxnaes. Blade made of N690Co steel.
FX-604 OD, a compact Core OD Green, Cerakote Black folder from the Italian company FOX. One of the best knives for everyday use with two ways of opening the blade with one hand using a flipper or an oval gap. Design of the respected Danish knifemaker Jesper Voxnaes, owner of VoxDesign. Favorite knife of outdoor and survival lovers, perfect E.D.C.
N690Co - high carbon stainless steel with cobalt addition for structural uniformity. Hardened in the range of 58-60 HRC. Manufactured in the Austrian Böhler-Uddeholm steelworks.
Blade - with a Drop Point profile, covered with a scratch-resistant and corrosion-resistant Cerakote™ Black ceramic coating. Smooth blade (Plain type) was made with a full flat cut (Full Flat Grind), reducing the weight, enabling effective cuts with the entire cutting surface. In the open position, the filipper serves as a functional lower cover (one-sided guard), preventing the hand from sliding onto the blade. Robust blade blockade: Liner-Lock type.
Handle - in green color. Covered with non-slip textured plastic FRN (Fiberglass Reinforced Nylon), fiberglass reinforced nylon, called „spacer” (handle lining connector). A screwed wire clip (left / right) allows you to move the folder in the tip-up position.At the back of the handle was placed a lanyard hole - hole for a rope.
Technical Specification:
Steel type: N690Co
Hardness of the blade: 58-60 HRC
Blade length: 80.0 mm/3.15"
Thickness of the blade: 4.0 mm/0.16"
Overall Length: 190.0 mm/7.48"
Weight: 135.0 g/4.76 oz
Cutting edge type: Plain (smooth)
Blade type: Drop Point
Lock Type: Liner-Lock
Handle material: FRN OD Green
Clip: Left / Right, Tip-up,
Producer: FOX Cutlery, Italy
Przeczytaj!
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.