FOX Ferox Fixed Blade by Tommaso Rumici (FX-630 B)
- Ferox design by Tommaso Rumici multifunctional FOX knife. Forged from a single piece of steel with a razor-sharp cutting edge and finger ring with carabiner. Two bit flat and Phillips screwdriver, bit adapter, tool socket in handle
Ferox, design by Tommaso Rumici, a multi-functional knife from the Italian company FOX. Forged from a single piece of steel with a razor sharp cutting edge and finger ring with snap hook. Plus two screwdriver bits flathead and Phillips screwdriver and a bit adapter that fits into a tool slot located in the handle.
Back ring / tail ring / pommel ring - Precisely contoured to prevent slippage finger ring. Holds knife in position / ready for use ensuring a secure grip, can be used to strike specific points on the body. Prevents knife from slipping when the going gets tough. Includes a clip that resembles a snap hook.
N690Co - High carbon stainless steel head with cobalt added for structural uniformity. Hardened in the range of 58-60 HRC. Manufactured in Austrian steelworks Böhler-Uddeholm.
Physical Vapor Deposition Gun Met - durability of the surface and edges of the blade is increased by the PVD method consisting in deposition of thin layers from the gas phase. Applied coating has very high hardness which significantly increases the blade resistance to rust and abrasive wear.
Blade - Drop Point profile, marked belly of the blade provides an excellent geometry of the cutting edge. The blade is partially serrated and comes out flat (Flat Grind). Finger guard, finger guard and thumb ramp with jimping, textured thumb ramp for better knife control.
Combination Edge - (Partially Serrated), a combination of a serrated blade for aggressive cutting of hard materials, plastics and fibers and a smooth blade for precision cutting. The serrated blade consists of alternating one large and two small teeth called a two-step. This pattern increases the length of the cutting edge by 24% compared to a straight blade.
Handle - textured, non-slip linings of resistant G10 plastic. Notched slots in the covers, each housing a screwdriver bit. Bits are secured by rubber rings, which also provide additional grip. On one side of the handle, there is a tool socket for a bit adapter.
Sheath - light and flat, made of kydex material. Holster protects the knife from falling out and facilitates quick retrieval of the knife in any situation. The pouch allows carrying on the belt in one of the defined positions.
Technical data:
Product number: FX-630B
Steel Type: N690Co
Blade hardness: 58-60 HRC
Blade length: 90.0 mm / 3.54"
Blade thickness: 4.0 mm / 0.16"
Total length: 210.0 mm / 8.27"
Weight: 132.0 g / 4.66 oz
Cutting edge type: Combo
Blade type: Drop Point
Handle Material: G10 Black, Rubber
Scabbard: Kydex
Manufacturer: FOX Cutlery, Italy
Przeczytaj!
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.