Demko Knife AD20.5 Clip Point Grey Grivory, Stonewashed AUS10A by Andrew Demko (205-10A-CPGRY)

Demko AD20.5 Clip Point Grey Grivory, Stonewashed AUS-10A rugged and sturdy EDC folding knife for hard work. Designed by Cold Steel's longtime designer, Andrew Demko. Cold Steel's greatest hits have come from under his hand. His Shark-Lock™ is considered the strongest in the world!

Andrew Demko - owner and founder of Demko Knives, first started forging chisels in 1988, when he was in seventh grade. He immediately realized it was his passion and began forging knives almost immediately. Like many blacksmiths, Andrew began his journey in the garage, honing blade shapes and sharpening them on a small grinder. Andrew's passion for engineering and attention to detail was noticed by the well-known Cold Steel company. At Cold Steel, Andrew developed some of the most innovative and powerful locking mechanisms in the industry. The legendary Tri-Ad Lock, Scorpion Lock, and most recently the one-handed operator's dream - the Shark-Lock.

AUS-10A - Japanese stainless steel, often compared to 440C series steel, and for good reason, as the compositions are similar, but these minor differences make AUS-10 harder (usually hardened to around 60 HRC) and dulls more slowly, without losing its rust resistance. Knives made of this steel are relatively inexpensive and will be a great choice if our budget is not too high and we care about stainless.

Shark-Lock™ mechanism is located on the back of the knife and is operated by a ramp-like "flipper". Opening the blade causes the spring-driven locking arm to move up and then into a notch in the shank, placing it under the locking pin. Uniquely, the locking mechanism moves forward and backward while moving up and down at the same time. This allows for an increase in the size of the blade contact area, providing better mechanical strength in a specific area. And because the drive spring that moves the locking element upward to the locked position is located in the locking arm itself, it will not be exposed to dirt and debris.

Blade - Clip Point type, finished with a scratch-masking Stonewashed finish. The belly extends the length of the cutting edge in relation to the length of the slender blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearings support the opening of the blade with either a dual thumb stud in the blade (dual thumb stud) or an oval hole (thumb hole). The entire blade is locked with what is considered the world's strongest Shark-Lock™.

Handle - grips made of Grivory, a virtually indestructible plastic that is insensitive to weather conditions, resistant to chemicals and mechanical damage. Chamfered edges of the covers eliminate sharp edges and characteristic surface texturing improves grip confidence. A single-position, right-handed clip allows the knife to be carried in the tip-up position, with the tip of the blade upward. A left-handed clip is included.

Technical data:
Product number: 205-10A-CPGRY
Product name: Demko AD20.5 Clip Point Grey Grivory, Stonewashed AUS10A

Overall length: 197.0 mm / 7.75″
Blade length: 82.5 mm / 3.25″
Blade thickness: 3.2 mm / 0.125″
Handle length: 114.0 mm / 4.5″
Handle thickness: n.d.
Weight: 100.0 / 3.53 oz

Blade material: AUS-10A
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Stonewash

Handle material: Grivory
Handle finish color: Grey
Backspacer material: Stainless Steel
Backspacer color: Gray

Clip: Right, Tip-Up
Clip material: Stainless Steel

Pivot mechanism: Ball Bearing (ball bearings).
Locking mechanism: Shark-Lock™
Opening method: Manual, dual thumb stud, thumb hole
Additional accessories: Left-handed clip

Designer: Andrew Demko
Brand: Demko
Manufacturer: Demko Knives
Country of origin: Taiwan

Developed by: the Sharg® company