Demko Knife AD20.5 Clip Point Natural G10, Stonewashed CPM S35VN by Andrew Demko (205-S35-CPN)

Demko AD20.5 Clip Point Natural G10, Stonewashed S35VN rugged and durable EDC folding knife for hard work. Designed by Cold Steel's longtime designer, Andrew Demko. Cold Steel's greatest hits have come from under his hand. His Shark-Lock™ lock is considered the strongest in the world!

Andrew Demko - owner and founder of Demko Knives, first started forging chisels in 1988, when he was in seventh grade. He immediately realized it was his passion and began forging knives almost immediately. Like many blacksmiths, Andrew began his journey in the garage, honing blade shapes and sharpening them on a small grinder. Andrew's passion for engineering and attention to detail was noticed by the well-known Cold Steel company. At Cold Steel, Andrew developed some of the most innovative and powerful locking mechanisms in the industry. The legendary Tri-Ad Lock, Scorpion Lock, and most recently the one-handed operator's dream - the Shark-Lock.

CPM S35VN - American martensitic high-alloy stainless steel with a hardness of 59-61 HRC, one of the best blade steels. Designed to provide better strength compared to CPM S30V, while keeping corrosion resistance at the highest level. Manufactured by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. The chemical composition has been balanced so that it is composed of 0.5% niobium carbides (Nb) along with 3.0% vanadium (V) and 14.0% chromium (Cr) carbides. Replacing some of the niobium carbides with vanadium carbides makes the steel about 15-20% harder than S30V without sacrificing wear resistance, and it is also easier to machine and polish. The improved strength of CPM S35VN also provides better resistance to edge chipping.

Shark-Lock™ mechanism is located on the back of the knife and is operated by a ramp-like "flipper." When the blade is opened, the spring-driven locking arm moves up and then into a notch in the shank, placing it under the locking pin. Uniquely, the locking mechanism moves forward and backward while moving up and down at the same time. This allows for an increase in the size of the blade contact area, providing better mechanical strength in a specific area. And since the drive spring that moves the locking element upward to the locked position is located in the locking arm itself, it will not be exposed to dirt and debris.

Blade - Clip Point type, finished with a scratch-masking Stonewashed finish. The belly extends the length of the cutting edge in relation to the length of the slender blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearings support the opening of the blade with either a dual thumb stud in the blade (dual thumb stud) or an oval hole (thumb hole). The entire blade is locked with what is considered the world's strongest Shark-Lock™.

Handle - grips made of G10, a virtually indestructible plastic that is insensitive to weather conditions, resistant to chemicals and mechanical damage. Chamfered edges of the covers eliminate sharp edges and characteristic surface texturing improves grip confidence. A single-position, right-handed clip allows the knife to be carried in the tip-up position, with the tip of the blade upward. A left-handed clip is included.

Technical data:
Product number: 205-S35-CPN
Product name: Demko AD20.5 Clip Point Natural G10, Stonewashed

Overall length: 197.0 mm / 7.75″
Blade length: 82.5 mm / 3.25″
Blade thickness: 3.2 mm / 0.125″
Handle length: 114.0 mm / 4.5″
Handle thickness: n.d.
Weight: 102.0 mm / 3.60 oz

Blade material: CPM S35VN
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Stonewash

Handle material: G10
Handle finish color: Natural
Backspacer material: Stainless Steel
Backspacer color: Gray

Clip: Right, Tip-Up
Clip material: Stainless Steel

Pivot mechanism: Ball Bearing (ball bearings)
Locking mechanism: Shark-Lock™
Opening method: Manual, dual thumb stud, thumb hole
Additional accessories: Left-handed clip

Designer: Andrew Demko
Brand: Demko
Manufacturer: Demko Knives
Country of origin: Taiwan

Developed by: the Sharg® company