Bestech Slasher Knife Green Micarta, Stonewashed D2 (BG43B-1)
- Slasher Green Micarta, Stonewashed compact EDC folding knife. Made with characteristic Bestech care. Featuring Micarta grips on the handle, Blade made of proven D2 tool steel, all at a great price!
Slasher Green Micarta, Stonewashed compact EDC folding knife. Made with characteristic Bestech care. Micarta grips on the handle, Blade made of proven D2 tool steel, all at a great price!
D2 - a high-carbon, high-chromium high-speed tool steel heat-treated to 59-60 HRC. With a high chromium content of 13.0% (Cr), it offers greater corrosion resistance than most high-carbon steels. Combines strength, excellent edge holding and easy sharpening. Features high wear resistance due to high carbide content in the microstructure.
Bar Lock - a transverse bar that moves horizontally in longitudinal cutouts in the steel side plates of the handle frame. When the knife is opened, the locking bar overlaps the back of the blade from above, preventing its return movement. This beam is pressed down by two springs. Unlocking is done by pulling back the locking bar, the ends of which are accessible through cutouts in the grips on the sides of the Handle grips. In the locked position, the bar presses against the cam surface at the back of the blade, preventing it from opening on its own. Advantages of the Bar Lock include resistance to contamination, practical insensitivity to dynamic loads, ease of operation with both right and left hands, and lightweight operation.
Blade - reverse tanto type, finished with a scratch-masking bath of fine Stonewashed pebbles. The gentle curve of the cutting edge converges towards the needle-sharp tip of the knife. The thickness of the blade provides high strength whilethe high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearings support the opening of the blade with a dual thumb stud in the wedge on both sides. A section of the back of the wedge is covered with upper jimping, a notched thumb rest for easy control of the knife. The whole thing is locked with the proven and popular bar lock.
Handle - grips made of Micarta, a practically indestructible plastic that is insensitive to weather conditions, resistant to chemicals and mechanical damage Chamfered edges of the covers eliminate sharp edges and characteristic texturing of the surface improves grip security. The solid backspacer to which the grips are attached guarantees the rigidity and strength of the entire structure. The two-position (right/left) clip allows the knife to be carried in tip-up position , with the tip of the blade upwards.
Technical data:
Product number: BG43B-1
Product name: Slasher Green Micarta, Stonewashed
Overall length:180.0 mm / 7.1”
Blade length: 78.0 mm / 3.07”
Blade thickness: 3.2 mm / 0.13”
Handle length: 102.0 mm / 4.01”
Handle thickness: n.d.
Weight: 99.3 g / 3.5 oz
Blade material: D2
Blade hardness: 60 HRC
Blade grind: Flat
Blade finish: Stonewashed
Handle material: Micarta
Handle finish color: Green
Backspacer material: Micarta
Backspacer color: Green
Clip: Right / Left, Tip-Up
Clip material: Stainless Steel
Pivot mechanism: Ceramic Ball Bearing.
Locking mechanism: Bar Lock
Opening method: Manual, dual thumb stud
Additional accessories: None
Designer: Bestech Knives
Brand: Bestech
Manufacturer: Bestech Knives
Country of origin: P.R.C
Developed by: the Sharg® company
Przeczytaj!
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.